DryTek Vigor 2952 series, Руководство пользователя

Страница: 781 / 811

Vigor2952 Series User’s Guide 769
radius authport [port_number]
radius set_auth_method [method idx]
radius client [add] [idx] -i [address] -m [mask] -p [prefix] -l [length] -s [secret]
radius client [del] [idx]
radius show
radius auth [0/1]
radius enable_dot1x [0/1]
radius set_dot1x_phase1 -e [method_idx]
radius set_dot1x_phase1 -d [method_idx]
radius set_dot1x_phase2 -e [method_idx]
radius set_dot1x_phase2 -d [method_idx]
S S y y n n t t a a x x D D e e s s c c r r i i p p t t i i o o n n
Parameter Description
eable[0/1] Enable (1) or disable (0) the RADIUS server settings.
Authport [port number] Configure the port number for authentication.
Port number: Available range is from 0 to 65535.
set_auth_method[method
idx] Specify which method will be used for authentication.
Method idx: “0” is “Only PAP”; “1” is
“PAP/CHAP/MS-CHAP/MS-CHAPv2”.
client add Speicfy a client to be authenticated by RADIUS server by typing
required information as follows:
-i [address]: client IPv4 address(domain)
-m [mask]: client IPv4 mask
-p [prefix]: client IPv6 prefix
-l [length]: client IPv6 prefix length
-s [secret]: client secret
ex: radius client add 1 -i 192.168.1.1 -m 255.255.255.0 -s 123
client del Delete related settings for selected client.
idx Specify the index number of client profiles.
show Display the status of RADIUS server.
auth [0/1] This command is used for RD debug only.
-e Set method for dot1x_phase1 or dot1x_phase2.
-d Delete method for dot1x_phase1 or dot1x_phase2.
[method_idx] Specify which method will be used
0: Only PAP
1: PAP/CHAP/MS-CHAP/MS-CHAPv2
At present, dot1x_phase1 can only support PEAP now. So only “1”
can be used for it.
And, dot1x_phase2 can only support MS-CHAPv2 now. So only “1”
can be used for it.
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
w
w
o
o
l
l