DryTek Vigor 2952 series, Руководство пользователя

Страница: 498 / 811

Vigor2952 Series User’s Guide 486
V V I I - - 5 5 - - 1 1 1 1 L L o o a a d d B B a a l l a a n n c c e e
The parameters configured for Load Balance can help to distribute the traffic for all of the
access points registered to Vigor router. Thus, the bandwidth will not be occupied by certain
access points.
Available settings are explained as follows:
Item Description
Enable Check the box to enable such function.
Mode It is used to determine the operation mode when the system
detects overload between access points.
By Station Number –The operation of load balance will be
executed based on the station number configured in this page.
It is used to limit the allowed number for the station
connecting to the access point. The purpose is to prevent lots
of stations connecting to access point at the same time and
causing traffic unbalanced. Please define the required station
number for WLAN (2.4GHz) and WLAN (5GHz) separately.
By Traffic – The operation of load balance will executed
according to the traffic configuration in this page.
Upload Limit –Use the drop down list to specify the traffic
limit for uploading.
Download Limit – Use the drop down list to specify the traffic
limit for downloading.
Force Overload
Disassociation
By Idle Time - When the access point is overload (e.g.,
reaching the limit of station number or limit of network
traffic), it will terminate the network connection of the
client’s station which is idle for a longest time.
By signal Strength - When the access point is overload (e.g.,
reaching the limit of station number or limit of network
traffic), it will terminate the network connection of the
client’s station with the weakest signal.