5
from the origin. The transport or shipping expenses, unless otherwise specified in the sale
contract, as well as the transfer expenses related to any intervention by the M
ANUFACTURER
’s
engineers at the User’s site are governed in the sale contract.
The
M
ANUFACTURER
,
for the construction of the
M
ACHINE
, uses materials, organs and mechanisms of
the type, state and quality deemed, at their unquestionable discretion, suitable for the functions
that the
M
ACHINE
must carry out. The M
ANUFACTURER
, in pursuing a policy of constant development
and upgrading of the product, reserves the right to modify both the functional and aesthetic
characteristics, to make changes to the design of any functional organ or accessory, or to suspend
production and supply, without giving any notice and without incurring any obligation whatsoever.
Furthermore, the company reserves the right to make any structural or functional change, in
addition to modifying the supply of spare parts and accessories without the obligation of notifying
anyone and for any reason whatsoever.
1.4.2. Parts not covered under Warranty
The parts subject to wear and any the consumable utensils and materials provided by the
M
ANUFACTURER
along with the
M
ACHINE
are not covered under warranty.
1.4.3. The responsibility of the user
All the following points are the responsibility of the user.
Electrical power supply
, with the suitable characteristics based on the type of motor installed
(on this subject, see paragraph 2.1 and in particular, the electrical characteristics indicated
specifically on the CE Tag of the individual pump unit).
Specific electrical disconnect switch
on the power supply line, dedicated only to the
MACHINE
or also relative to the machinery / system for which the
MACHINE
carries out lubrication, with
the following characteristics:
-
isolates the electrical equipment from the power supply having only one open and closed
position;
-
is lockable with suitable devices (for example a padlock) in open position 0 – OFF or fitted
with a wall plug;
-
the disconnect device interrupts all the live wires on its power supply circuit.
Control system
for management of the motor (start / stop pump) and the signals coming from
the level sensors located in the grease reservoir, fitted with a
simple arrest dedicated control
,
which, once launched, determines a stop in Category 0 or in Category 1, in order to have the
actuators of the
MACHINE
completely disconnected from the power supply in a reasonable time
in any case.
M
ACHINE
grease reservoir filling system, whether gun, pump or automatic.
Grease distribution system
downstream of the
MACHINE
(the selection and installation of
which is the responsibility of the customer), including the piping and the connections,
suitable
for managing the pressures
that develop in it due to the pumping of grease in it by the
MACHINE
, including the
detection / reading system of the relative pressure point
.
In the event of installation of
emergency stop control
, the logic chain that also includes the
MACHINE
must reach a reliability such to guarantee a minimum Performance Level equal to PL =
c, in accordance with UNI EN ISO 13849-1: 2016
Utensils and consumable materials.
