25
5.5.1
Start-up
To start the 989 v2, you must:
insert the wall plug or position the electrical
disconnect switch
on the
MACHINE
’s power supply
line to
I
– ON
;
Check the setting data indicated on the control panel (if present).
Press the start button on the machine where the pump is connected.
Ensure that the pump starts.
Ensure the adequate lubrication of the machine (if there are doubts on correct operation, you
can contact the DropsA S.p.A. Technical Office and ask for the testing procedure).
5.5.2
Arrest
To stop the 989 v2, you must:
position the electrical
disconnect switch
on the machine’s power supply line to
O
– OFF
or
remove the wall plug.
This way, the 989 v2 is
disconnected from any power supply
.
6. Maintenance and demolition
Before carrying out any maintenance or cleaning operation
described below, you must always
disconnect
THE
989
V
2 from the relative power supplies, carrying out all the operations indicated
below.
Position the electrical
disconnect switch
on the machine’s power supply line to
O
– OFF
or
remove the wall plug.
Place a sign on the machine reading “MACHINE IN MAINTENANCE”.
Always ensure the absence of pressure
IN THE GREASE DISTRIBUTION SYSTEM DOWNSTREAM OF THE
MACHINE
.
DANGER:
the M
ANUFACTURER
will not be held liable for any damage to objects and/or personnel
stemming from improper operations carried out by unqualified, untrained, inadequately
equipped or unauthorised personnel.
In any case, to carry out all maintenance or cleaning operations indicated below in
correspondence to the 989
V
2 , the following Personal Protection Equipment is required:
