4
1.2. Property of the Information
This Operation and Maintenance Manual contains information that is confidential property.
All rights are reserved.
This manual cannot be reproduced or photocopied in all or in part without previous written
consent from the
M
ANUFACTURER
. The use of this documentation material is permitted only for the
customer to whom the manual was provided along with the machine
and only for purposes of
installation, operation and maintenance on the M
ACHINE
to which the manual refers.
The M
ANUFACTURER
declares that the information contained in this manual is consistent with the
technical and safety specifications of the machine
to which the manual refers. The drawings,
diagrams and technical data are updated to the date of publication of this document and are valid
exclusively for the M
ACHINE
to which they are attached.
The M
ANUFACTURER
reserves the right to make changes or improvements to this documentation
material without advance notice.
The M
ANUFACTURER
assumes no responsibility for direct or indirect damage to people, objects or
pets resulting from the use of this documentation material or the M
ACHINE
in conditions other than
those foreseen.
1.3. Contents of the Operation and Maintenance Manual
This Operation and Maintenance Manual is intended for operators and engineers so that they can
know and correctly use the M
ACHINE
.
In fact, in addition to a functional description of the Machine
and its primary parts, this manual
contains the instructions and indications for:
correctly transporting and installing the
M
ACHINE
;
correctly using the
M
ACHINE
;
carrying out correct cleaning and maintenance on the
M
ACHINE
;
placing attention on the most basic safety and accident prevention rules.
The personnel indicated above will thereby be able to know both the potential of the
M
ACHINE
and
the problems that can arise while managing it.
The most recent version of this document can be obtained by requesting it from the Sales
Technical Office or online at www.dropsa.com.
1.4. Warranty
1.4.1. General Conditions
T
HE
M
ANUFACTURER
, DROPSA S.P.A. guarantees the 989
V
2 and the equipment manufactured by the
same M
ANUFACTURER
free of material and processing defects for a period that is agreed upon at the
stipulation of the
M
ACHINE
sale contract.
During the warranty period, the Manufacturer undertakes to remove within the necessary time
the clear material or processing defects in the event of malfunction or breakdown. This is
contingent on the condition that the M
ACHINE
has been assembled with the assistance of the
Manufacturer’s engineers and that it has been used correctly in compliance with the best rules of
operation and maintenance indicated in this manual. Any defective parts under warranty are
repaired or replaced free of charge by the M
ANUFACTURER
if it is demonstrated that they are defects
