Drivecon Inc. reserves the right to alter or amend the above information without notice.
PWRSII 6-2-13
PWRSII 6-2-11
Page 9 o18
Figure 6 PWRSII 6-2-11 and PWRSII 6-2-13 transmitters
ON, indicating that the power supply is correct.
On receiving a signal from the transmitter, the receiver will enter into the WORKING
mode. The following LEDs will light up on the receiver:
POWER
:
HARDOK:
ON, indicating the absence of defects on the board.
SIGNAL:
Flashing ON, indicate that it is receiving a RF signal at the working
frequency.
DATA
:
Flashing ON each time a good frame is received without caring about
ID. This means that the data received has a correct format.
ID
:
Flashing ON (quickly) each time a good frame is received with ID
correct. This means that the receiver has recognized the transmitter’s
identification code
