Dremel 3D40 FLEX, Оригинальное руководство пользователя

Страница: 525 / 588

may affect the Dremel 3D40 FLEX’s operation.
If damage is suspected then have the Dremel
3D40 FLEX repaired by an authorised Dremel
service centre before use.
Use of Dremel 3D40
FLEX when damaged may result in poor quality of
object creation, further equipment damage, property
damage or personal injury.
b. Do not touch the extruder tip during Dremel
3D40 FLEX operation or until it has cooled
down to at least 60°C (140°F). Contact with the
extruder tip during or after operation before tip has
cooled may result in personal injury.
c. Set up the Dremel 3D40 FLEX in a well-
ventilated area. Provide at least 8 inches of
unobstructed spacing around Dremel 3D40
FLEX.
Dremel 3D40 FLEX melts plastic during
building. Plastic odours emitted during Dremel
3D40 FLEX operation may irritate eyes and
airways. Locating Dremel 3D40 FLEX close to
surrounding objects prevents proper ventilation.
d. Do not reach inside the Dremel 3D40 FLEX
while it is in operation. Contact with Dremel 3D40
FLEX moving parts during operation may result in
poor build quality, equipment damage or personal
injury.
e. Prevent untrained individuals accessing the
3D40 FLEX during operation. Use of Dremel
3D40 FLEX by persons unfamiliar with these
warnings an instructions may result equipment or
property damage and personal injury.
f. Use only DREMEL PLA filament. Use of filament
not authorized by Dremel may result in equipment
and property damage.
g. Ensure small objects created by Dremel 3D40
FLEX are not accessible to young children.
Small objects are potential choking hazards for
young children.
h. Do not create illegal or inappropriate objects
using Dremel 3D40 FLEX.
i. Do not use Dremel 3D40 FLEX to create objects
intended for use with candles, liquid fuels,
and other heat sources. Plastic may melt when
exposed to fire or other heat sources. Such use of
objects created by Dremel 3D40 FLEX may result
in fire, property damage and personal injury.
j. Do not use Dremel 3D40 FLEX to create
objects intended for food or drink applications
such as preparation, decoration, storage,
or consumption.
Such use of objects created
by Dremel 3D40 FLEX may result in illness or
personal injury.
k. Do not use Dremel 3D40 FLEX to create objects
intended with use with electrical components or
housings of electrical components. PLA plastic
is not suitable for electrical applications. Such use
of objects created by Dremel 3D40 FLEX may
result in property damage and personal injury.
l. Do not put plastic objects in or around your
mouth. PLA plastic is not suitable for food or drink
preparation and food utensils. Such use of objects
created by Dremel 3D40 FLEX may result in illness
or personal injury.
m. Do not use Dremel 3D40 FLEX to create objects
intended for chemical storage.
PLA plastic is not
suitable for chemical storage. Such use of objects
created by Dremel 3D40 FLEX may result in
property damage and personal injury.
n. Do not modify Dremel 3D40 FLEX or alter
factory settings.
Modifications may result in
equipment and property damage, and personal
injury.
o. Do not expose Dremel 3D40 FLEX to
temperatures exceeding 70°C (158°F).
Dremel
3D40 FLEX may become damaged. Dremel
3D40 FLEX is intended to operate in temperature
between 16-29° C (60 - 85° F).
p. Do not move or bump Dremel 3D40 FLEX or the
extruder during operation.
The object may build
incorrectly.
q. Do not change filament spool unless the
building process is completed, stopped, or
paused.
Changing the filament during building will
cancel the object and may damage the extruder.
r. Do not pull the filament out until instructed
by the touch screen.
Doing so may damage the
extruder.
s. Use extra care not to damage the extruder tip
when clearing debris. Dremel 3D40 FLEX will not
work properly with damaged extruder tip and will
require replacement.
t. Before every build make sure that the build
platform is covered with Dremel specified build
tape.
Use of improper build tape may result in
equipment damage and poor object build quality.
u. Be aware of your body position when using
hand tools to remove objects from the build
platform.
Sudden tool slip and improper body
position during object removal from the build
platform may result in personal injury.
v. Avoid scratching the build platform when
removing objects.
Scratches in the build platform
will result in improper object creation.
w. Do not drop the build platform. Tempered glass
plate may break and result in personal injury.
x. Do not remove tempered glass plate from
plastic holder.
Contact with tempered glass plate
edge may result in personal injury.
y. Do not twist or bend the build platform while
removing objects.
Tempered glass plate may
separate from plastic holder and result in personal
injury.
z. Dremel is not responsible for structural integrity
or utility of objects created using Dremel 3D40
FLEX.
Structural models created by inexperienced
designers may result in property damage and
personal injury.
SERVICE
a. Always unplug Dremel 3D40 FLEX from
its power before performing any service
procedures.
Failure to do so may result in
personal injury and equipment damage.
b. Have your Dremel 3D40 FLEX serviced only by
an authorized Dremel service centre using only
Dremel replacement parts.
This will ensure that
proper operation and safety of Dremel 3D40 FLEX
is maintained.
c. Use only Dremel approved materials and
components.
Use of object materials, or 3D
objects other than Dremel
®
approved object
materials and genuine Dremel
®
components may
void warranty.
d. Use only Dremel approved filament.
Damage
to the product resulting from use of filament other
than Dremel approved filament is not covered
under warranty.
TABLE OF CONTENTS
General safety warnings .................................. 524
Table of contents ............................................... 525
Used symbols .................................................... 526
FCC compliance ............................................... 526
Information on Intellectual Property ............... 526
Functional Description and Specifications .... 526
3D40 FLEX Resources ...................................... 527
Glossary of Terms ............................................. 528
Getting to know your 3D40 FLEX.................... 529
Introduction ........................................................ 531
Kit Contents* ...................................................... 531
Touch Screen ..................................................... 533
Touch Screen Icons .......................................... 538
Initial Setup ........................................................ 539
Getting Ready to Build ..................................... 540
Initial setup ........................................................ 542
Building .............................................................. 545
Removing Your Object ...................................... 547
Best Practices ................................................... 548
Maintenance ....................................................... 549
Maintenance and Service ................................. 551
Open Source Software ..................................... 552
Warranty ............................................................. 553
525