Draytek VigorSwitch V1281 Скачать руководство пользователя страница 79 | Manualshive

Страница: 79 / 79

Draytek VigorSwitch V1281 Скачать руководство пользователя страница 79

IV-

IV-

2

2

Contacting DrayTek

Contacting DrayTek

Getting further help

If the VigorSwitch does not appear to be operating correctly or if you’re looking for
additional information on how to configure the switch, please visit our web site
(www.draytek.co.uk) for further troubleshooting advice or to contact our support
technicians. Always have your serial number to hand.

Users in the UK/Ireland using qualifying products should visit for support options including

email support, telephone support, our help knowledgebase and access to the UK user
support forums.

If you are outside of the UK/Ireland, please contact your own local supplier, email to
[email protected] or visit www.draytek.com/support

For warranty service, in the first instance, please contact the support services, as listed

above, for help in diagnosing or eliminating the problem or issue. The support department
can arrange repair or service if then deemed necessary.

You should keep your proof of purchase (original invoice) safely in case warranty or other
service is ever required.

Additional Feature Setup

These are covered in the main user manual, which is available on the Downloads page:

https://www.draytek.co.uk/support/downloads

The online knowledgebase has additional information on how to configure the VigorSwitch’s

more advanced features:

https://www.draytek.co.uk/support/product-knowledgebase

Keep up to date with our mailing list

Now that you have your DrayTek product, you should keep up to date with product updates
(firmware), security advisories and other product news, advice or special offers. Users in

the UK/Ireland can subscribe to our mailing list. For details and to subscribe, please visit

In other countries or regions, please contact your local distributor/supplier for local options.

Firmware Updates

It is strongly recommended that you keep your switch firmware up to date with the latest
version in order to have all of the latest security and feature improvements.

Always obtain firmware from official sources, i.e. (for UK/Ireland users).

It is recommended to take a configuration backup prior to upgrading the firmware.

VigorSwitch V1281 User Guide

73

«
...
77
78
79

Содержание VigorSwitch V1281
















































































Отзывы:

Нет отзывов