Draytek VigorSwitch V1281 Скачать руководство пользователя страница 77

Страница: 77 / 79

Local SysLog

This page allows user to enable logging into volatile memory or non-volatile memory.

Available settings are explained as follows:

Item

Description

Source

Volatile Memory

– Select the volatile memory for saving local

log. Volatile memory does not hold the log after reboot or
power off.

Non-Volatile Memory

Select the non-volatile memory for

saving.
If you want to modify

Volatile Memory / Non-Volatile

Memory

, select

Volatile Memory / Non-Volatile Memory

this field. Then, use the drop down list of severity to specify
type of log message. After clicking

Apply

, the

Volatile

Memory / Non-Volatile Memory

will be modified with new

configured severity level.

Severity

Select severity (emerg, alert, crit, error, warning, notice,

info and debug) of log messages which will be stored.

Apply

Save the settings or changes to the switch.

Delete

Remove all logs displayed in this page.

VigorSwitch V1281 User Guide

Содержание VigorSwitch V1281
















































































Результаты поиска

Содержание VigorSwitch V1281

Отзывы:

Draytek VigorSwitch V1281, Руководство пользователя, Страница: 77 / 79

Результаты поиска

Содержание VigorSwitch V1281

Отзывы: