Draytek VigorSwitch V1281 Скачать руководство пользователя страница 35

Страница: 35 / 79

II-

-2

[Preset

Setup]

Configure the desired Port configurations for a Preset.

The port configurations are displayed in a table, which shows all LAN / Output ports on the

X axis and Sources / output settings on the Y axis.

Select a Preset to modify, click/press on a

Source

row for each of the desired

Output

columns and click

Apply

to save the changes.

Available settings are explained as follows:

Item

Description

Preset Name (1-11)

Select the preset to modify it. Upon selection, the preset

configuration will be displayed in the table.

Ports (labelled 1-28)

Each column represents a port on the VigorSwitch that is

either an Output port or is used for LAN access



- LAN/Admin ports, these can not be modified by presets



- Unconfigured ports, these can not be modified by

presets



Output

ports



Source

ports (only displayed when “

Show Source Ports

”

is enabled

LAN/Admin

The selected port is used for LAN/Admin access and is not
managed by the [Preset Setup] configuration

VigorSwitch V1281 User Guide

Содержание VigorSwitch V1281
















































































Результаты поиска

Содержание VigorSwitch V1281

Отзывы:

Draytek VigorSwitch V1281, Руководство пользователя, Страница: 35 / 79

Результаты поиска

Содержание VigorSwitch V1281

Отзывы: