DRALLE sScale, Руководство пользователя

Страница: 37 / 52

31
5. Other menu functions
5.1. Functions of the user interface “Main Menu”
All the following functions can be accessed by calling up the main menu. This is done by
pressing the sScale™ logo at the top left of the screen and can be done from any user interface.
5.1.1. Registrations
By pressing the button 2.2.2.6 “Registrations” you reach the sub -menu “Registrations”. Here
is a list of received measurement jobs, a directional navigation, and detailed information about
a selected measurement job. You can also reject measurement jobs and remove them from
the registration list.
List of measurement jobs
The measurement jobs are sorted according to their distance to the location of the vehicle.
This distance represents the distance as the crow flies and is given below the Woodpile ID. It
is stated in meters or kilometres.
You can use the buttons 2.2.3.2 “Arrow” to scroll through the list. A page contains 13 meas-
urement jobs.
By clicking on a measurement job, you can highlight it in the directional navigation, adjust the
scale of the directional navigation to the distance to this measurement job, and view details
about this measurement job.
Directional navigation
The centre of the “Radar” represents the vehicle. The directions are as usual (top north, right
east, bottom south and left west). The measurement jobs in the list are displayed in relation
to their location to the vehicle. The navigation scale will automatically change with the distance
to the selected measurement job. All measurement jobs are displayed that are in the respective
radius.
Job details
On the right side of the screen you will find details concerning the measurement job selected
in the list on the left side.
In addition to the position of the woodpile, the seller and buyer, as well as tree species and
assortment and a note of the applicant are displayed. All of this information was previously
submitted via the sScale™ server (see separate documentation).
By pressing the button 2.2.3.5 “Reject” you can reject a measurement job. This may be nec-
essary if, for example, the woodpile has already been measured.
Rejecting a woodpile requires justification and confirmation in the pop-up window that ap-
pears.
5.1.2. Archive
By pressing the button 2.2.2.7 “Archive” you reach the sub - menu “Archive”. Here you will find
all measurements made so far. The measurements are sorted by time and grouped by days.
By pressing the buttons 2.2.4.3 “Arrow” you can scroll through the measurements of a day
and by pressing the buttons 2.2.4.5 “<> Day” you can switch between the days.
The overview list shows the Woodpile ID and the woodpile volume in m³ (cubic meters) for
each measurement, as well as tree species, assortment, seller and buyer.
By clicking on an entry, you get to the detailed information of the measurement (see Chapter
A.4).
In addition, the total amount measured on the respective day is displayed next to the date.