DRALLE sScale, Руководство пользователя

Страница: 25 / 52

19
Figure 8: Adding and deleting polygon vertices
CAUTION:
The user of the system is responsible for ensuring that the minimum area of 2m² is maintained.
This is indicated by the red colouring of the result. A woodpile with a smaller front surface
than 2 m² must be measured manually for verifiable legal reasons (see Chapter 4.2 Manual
measurement)
CAUTION:
The user of the system is responsible for ensuring that the woodpile face area demarcation is
sufficient to be bounded by the polygonal course. Dralle A/S can only guarantee that the area
indicated later, within the measurement uncertainty, corresponds to the area covered by the
polygonal course.
TIP:
If necessary, use the zoom function to better identify details of the woodpile face. This is
achieved by pressing the button 2.2.8.2 “Magnifying glass”.
How precisely does the polygonal course need to be adjusted?
Generally, the polygonal course output by the system must be optimised. To guide you for the
precision you need, the following illustrations show schematic polygonal courses and polygonal
courses created with the sScale™ system. It shows inadequately optimised polygonal courses,
overly optimised polygonal courses, and appropriately optimised polygonal courses.
The following rule describes the action of the polygonal course optimisation:
A gap in the woodpile cover is digitised out if one of the surrounding logs can fill in this gap.
Gaps that can not be filled but still seem too big to be ignored are only digitised to half the
depth.