14 Installation
(for qualified installers only)
© Travis Industries
4140514
100-01374
Nailing Brackets – Flush Install
The fireplace has nailing brackets on both sides. Secure the fireplace to the framing.
NOTE
: Make sure the fireplace is square and plumb when placed in the framing. Measured corner-to-corner
the fireplace should be square. Use shims to insure the fireplace is square.
Bend the side nailing brackets as shown below.
NOTE: if you can not use the
front nailing brackets, an
additional bracket is supplied on
the side that allows the fireplace
to be secured to the floor (bend
tab down and secure).
Secure the fireplace to
the framing using the
nailing brackets and
vertical drywall support.
Bend the vertical drywall support forward.
The mounting hole is now vertical and may
be secured to the framing from below.
Bend the top nailing bracket
as shown until it is flush with
the front of the fireplace.
c
a
b
Rotate the bracket on the
rivet 180 degrees.
