Dräger Movita Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 58

Dräger Movita Скачать руководство пользователя страница 40

Technical data

40

Instructions for use Movita

Classification

EMC declaration

General information

The device was tested for electromagnetic
compatibility using accessories from the list of
accessories. Other accessories may only be used
if they do not compromise the electromagnetic
compatibility. The use of non-compliant
accessories may result in increased
electromagnetic emissions or decreased
electromagnetic immunity of the device.

The device may be used in the direct vicinity of
other devices only if Dräger has authorized this
device arrangement. If no authorization has been
given by Dräger, it must be ensured that the device
functions correctly in the desired arrangement
before using it. The instructions for use for the other
devices must be followed.

Electromagnetic environment

The emissions from this device were tested in the
following frequency ranges:

Protection class in accordance
with IEC 60601-1

Protection
class 1

Standards complied with

IEC 60601-1
IEC 60601-1-2
ISO 11197

Classification in accordance with
EU Directive 93/42/EEC
Annex IX

Class II b

UMDNS code
Universal Medical Device
Nomenclature System –
Nomenclature for medical
devices

18-046

Emissions

Compliance

Radiated emissions

Class A, group 1 (150 kHz to 30 MHz)

Conducted emissions

Class A, Group 1 (30 MHz to 1 GHz)

«
...
38
39
40
41
42
...
»

Содержание Movita



























































Отзывы:

Нет отзывов