manualshive.com logo in svg

Dräger Movita, Инструкция по эксплуатации, Страница: 27 / 58

Поделиться
Скачать
Dräger Movita Скачать руководство пользователя страница 27

Instructions for use Movita

27

Operation

Movita lift: Electrically-operated height adjustment

The keys for height adjustment are either on the 
control panel on the media head or media column 
or optionally on the cable remote control.

Moving the media column/media head 
upwards

1

Push the 

up arrow

 key (A) and release it in the 

desired position.

Moving the media column/media head 
downwards

2

Push the 

down arrow

 key (B) and release it in 

the desired position.

At the top and bottom limit positions, the lifting 
motor switches off automatically.

Status indicator

An LED indicator in the middle of the control panel 
(A) or on the control handles (B) shows the status 
of the system:

– LED indicator is lit continuously green: Ready 

for operation.

– LED indicator flashes green: One or more keys 

are not working. Inform DrägerService.

– LED indicator flashes alternately green and red: 

Combination of several faults. Inform 
DrägerService.

– LED indicator off: Not ready for operation.

Maximum actuation time of the 
electrically-operated height adjustment

The electrically-operated height adjustment for the 
ceiling supply unit may be actuated for a maximum 
of 30 seconds. After that, the ceiling supply unit 
must not be actuated for 5 minutes.

CAUTION

Danger of damage to objects

Ceiling supply units, especially lift systems, can 
collide with other ceiling supply units, associated 
surgical lights, or room walls as a result of brisk or 
careless operation. This can cause devices 
placed on the shelves (e.g. monitors) to be 
clamped under the lift arm.

Because of this, damage to the arm system can 
result, which in an extreme case can lead to parts 
of the arm system breaking.

033

A

B

A B

033

NOTE

Observing these times prevents damage to the 
supply unit.

A

B

Содержание Movita



























































Отзывы:

Нет отзывов