Instruction Manual Dräger GS2
1
Remarks
Any use of the Dräger GS2 requires a full understanding and strict adherence to these in-
structions and to the national and international regulations and standards. The instrument
is only to be used for the purposes specified here.
This instruction manual is part of the instrument and kept save.
EU-wide regulations for the disposal of electric and electronic appliances which
have been defined in the EU Directive 2002/96/EC and in national laws are effect-
tive from August 2005 and apply to this device. Common household appliances
can be disposed of using special collecting and recycling facilities.
However, as this device has not been registered for household usage, it must not be dis-
posed of through these means. The device can be returned to your national Dräger Sales
Organization for disposal. Please do not hesitate to contact Dräger MSI GmbH if you have
any further questions on this issue.
Do not throw used batteries into fire or try to open them by force.
Dispose of the batteries in accordance with national regulations.
The Leakage Detector
The Dräger GS2 is an electronic leakage detector to detect different combustible gases.
Don’t use the Dräger GS2 as monitoring unit for your individual safety!
gas sensor
flash-LEDs
push-button
battery case
Switch on
Switch on the Dräger GS2 by pressing the push-button for a short time (< 1s). After switch-
ing on the batteries capacity will be shown by flashing LEDs:
4 flashes: batteries full
1 flash: batteries empty
The warm up is shown by continuous flashing LEDs.
The readiness for operation is shown by constant flashing LEDs and a constant ticking
(1 x every 2 seconds).
