1
08/03/2018
SafeAir CM
Installation Instructions
The SafeAir CM is a ventilation interlock with built in current monitoring and gas detection.
The system will ensure that any mechanical ventilation connected (supply and/or extract) is running before
the gas can be used, when installed with gas sensors it will also monitor the atmosphere for CO and/or CO
2
.
It will then continually monitor for fan operation.
Before commencing installation please familiarise yourself to the equipment by reading the comprehensive
installation instructions. If in doubt then please call 0161 233 0600. Out of hours please call 07894 684080 or
07843 355163.
It is a statutory requirement that this safety system is installed and commissioned
to the satisfaction of the manufacturer.
A commissioning certificate must be issued to the end user along with instructions for the operation of the
equipment.
As the Manufacturer Medem UK should commission this safety system whereupon a commissioning report
will be forwarded to the installing agent who should provide a copy to the end user.
At the point of our commissioning an individual serial number will be attached to the system along with a 24
help line number. Photos and all relevant information for the installation will then be stored on the Medem
site database to be accessed in the event of a call on the 24 hour help line. The warranty period for the
panel and sender unit will then be extended to Ten years.
•
Gas Detection .(up to 4 detectors )
•
Built in Fan Current Monitor for Fan interlocking.
•
5 year warranty - 10 years when commissioned
SafeAir CM features
