19
POWER SEAMER K 9-1
Variable pressure adjustment K9-1-ASS
Service Tip: Pressure Adjustment
Depending on the hardness of the materials, the
pressure to the forming stations has to be increased
to achieve an optimum closed seam.
Pressure can be changed on both adjustment rings
regular.
Increase pressure:
Decrease pressure:
Turn both adjustment rings
clockwise
Turn both adjustment rings
anti-clockwise
After the adjustments are made, check seam closure
on a sample panel.
Seamer in non-operation, turn both rings anti-
clockwise to reduce pressure to the disk springs.
... das Dach- und Wandprogramm von
Loosen locking
handle before
adjusting the
pressure
Adjustment rings
with pin hole
