11
Locking handle closed
◼
Close locking handle until engaged.
◼
Closed locking handle must be parallel to the panel.
◼
If handle is not closed correctly, when working, it could
open back up.
◼
For safety reason, always fasten rope to lifting eyes.
◼
Operate seamer on grounded connections, extension
cables or cable drums, only.
◼
Switch machine to
“on“ and press “start” button.
The seamer cuts the seam open automatically.
◼
At the end of the seam, switch machine off, or set back
switch no. 6 to stop. See page 20.
◼
Open locking handle.
◼
Take seamer out of panel.
If the seamer runs against an obstruction, the rest of the seam has
to be cut open by hand.
... the Roof- and Wall Program of
