Revision 1.3
Revision Date 1/28/2020
Turbonator® VGT Controller
www.dieselpowersource.com
____________________________________________________________________________
Exhaust Pressure Sensor Mounting Bracket Installation Instruction
_____________________________________________________________________________________
1.
Attach the pressure sensor mounting bracket onto the firewall using self tapping screw, in such
a way that the pressure sensor is vertical (electrical plug side up). Condensation can occur in the
copper tube and MUST BE MOUNTED UPRIGHT to drain the water away from the sensor.
MOUNT SENSOR AWAY FROM EXHAUST COMPONENTS.
2.
Route the copper tube in such a way that it is on a constant downward slope from sensor to
turbine housing fitting. Use the provided PVC pipe as a mandrel to bend the tube around so it
does not kink. (See the next page for pictures)
3.
Attach the copper tube to the sensor and fitting in turbine housing and tighten.
