DPS Turbonator VGT, Руководство по установке

Страница: 2 / 13

Revision 1.3
Revision Date 1/28/2020 Turbonator® VGT Controller
www.dieselpowersource.com
Wiring Harness
Step 1: Lay the main harness out on the floor, every connector can only connect to a specific
connector. (Figure 1)

You should have the following components that connect to the main harness.
1. Turbonator® VGT Microcontroller
2. Two Pressure Sensors (Purple=Boost / Yellow = Exhaust)
3. Main Harness
4. Exhaust Brake Adapter (One of three styles included)
5. Turbo Adapter
6. Exhaust Switch with USB Connector
Wiring Harness (Cont.)
Step 2: Connect the harness on the floor in order to associate each piece.

Figure 1: Main Harness (Unassembled)

Figure 2: Microcontroller (Turbonator® VGT Controller)

Figure 3: Exhaust brake switch and USB adapter

Figure 4: 2003-07 Dodge Cummins (C/R) and Universal Exhaust Brake Adapter

Figure 5: 1998.5-02 & 2007.5-18 Cummins Exhaust Brake Adapter (Yellow Wire)

Figure 6: 10 Amp Fuse in Fuse Holder
Figure 2
Figure 3