Technical specification of the WC timer
The WC timer is used to control the operation time of the
fan after the previous system is activated with an electrical
impulse, and then disconnecting the impulse. The WC
controller works perfectly with the lighting system of the
room. The system is activated by using a “T” In the control
signal switch.
After proper installation of the fan with the
WC controller (according to the connection diagram), the
controller turns the fan on when switching on the light in
the room where the fan is installed. After switching off the
lights, the controller switches the fan from the continuous
operation mode to the extended operation mode. This
means that the fan will continue to run for the time set on
the potentiometer "TIME".
After this time, the fan will
turn off automatically. The light shows the continuous
operation mode of the fan while the light in the room is on
and the system is activated through the “T” terminal.
During the extended operation mode, the light on the fan
is off.
Depending on your needs, the extended operation
mode can conveniently be adjusted via the potentiometer
"CZAS" (TIME)
from 2 to 23 minutes. With the use of a
Philips screwdriver carefully turn from the left to the right
side (clockwise) to increase the time of operation. Turn
counterclockwise in order to decrease the operation time.
Be careful not to damage the potentiometer.
Adjustment
With a screwdriver turn the CZAS (TIME)
potentiometer clockwise — the operating time of the
fan will be extended. Turn it the other way to shorten
the operation time. The available settings range from
2-23 min.
WC –
Adjustment
, Technical data
EN
ZEFIR
Ø100
ZEFIR
Ø120
Technical data
Airflow performance characteristics
Type
Air flow
Power
Acoustic pressure
Weight
Static pressure
Current consumption
Power supply voltage
IP Code
Static pressure
Max. Working Temp.
Motor rotation
Insulation class
Type of bearing
slide bearing
Unit
1. ZEFIR Ø100
2. ZEFIR Ø120
10
3
[m /h]
100
150
[mm H O]
2
3.47
4.99
[dB(A)]
40
46
[V/Hz]
230/50
230/50
[Pa]
34
49
2650
2650
[A]
0.12
0.13
[kg]
0.32
0.45
[IP]
X4
X4
[ C]
o
40
40
rpm.
[W]
15
17