6100 Series Industrial End Drive Conveyors Installation, Maintenance & Parts Manual
851-268 Rev. F
6
Dorner Mfg. Corp.
Mounting
Brackets with Return Rollers
Cleated Belt Conveyors
1
.
Typical components (Figure 8)
Figure 8
2
.
Loosen screws (R of Figure 9) and remove screws
and washers (S).
Figure 9
R
S
3
.
Attach clamp plates on each side of conveyor (Figure
10). Tighten the screws (R) to 80 in-lb (9 Nm).
Figure 10
S
R
4
.
Attach
to support stand. Tighten screws (S) to 80
in-lb (9 Nm). Make sure belt is free to move.
2¨ to 6¨ (44 mm to 152 mm) Wide Flat Belt
Conveyors
1
.
Typical components (Figure 11)
Figure 11
2
.
Loosen screws (R of Figure 12) and remove screws
and washers (S).
Figure 12
R
S
3
.
Attach clamp plates on each side of conveyor (Figure
13). Tighten the screws (R) to 80 in-lb (9 Nm).
Figure 13
R
S
4
.
Attach to
support stand. Tighten screws (S) to 80
in-lb (9 Nm). Make sure belt is free to move.
Installation
