6100 Series Industrial End Drive Conveyors Installation, Maintenance & Parts Manual
851-268 Rev. F
18
Dorner Mfg. Corp.
IMPORTANT:
Bearing and pulley alignment is
critical.
4
.
Press bearing (BO of Figure 54) into pulley (BN)
until seated.
Figure 54
BO
BN
Pulley Replacement
Drive Pulley with Standard 0.47¨ (12 mm)
Diameter Output Shaft Replacement
1
.
Reverse the removal procedure “
A
” (see page 13).
Idler Pulley Replacement
IMPORTANT:
On a tension tail assembly, orient
both pinion housings (BR of Figure 55) so they
engage the same tooth positions on their respective
racks.
Figure 55
BR
1
.
Reverse the removal procedure “
B
” (see page 13).
Idler Pulley with Tool-less Belt Release
Replacement
IMPORTANT:
On a tension tail assembly, orient
both pinion housings (BR of Figure 55) so they
engage the same tooth positions on their respective
racks.
1
.
Reverse the removal procedure “
C
” (see page 14).
Gang Drive Pulley Replacement
1
.
Reverse the removal procedure “
D
” (see page 14).
Preventive Maintenance and Adjustment
