6100 Series Industrial End Drive Conveyors Installation, Maintenance & Parts Manual
Dorner Mfg. Corp.
17
851-268 Rev. F
Figure 49
BP
NOTE:
If a severely worn bearing breaks apart dur-
ing removal, pulley must be replaced.
5
.
Press bearing out of pulley.
Figure 50
BL
Bearing Installation
1
.
Orient bearing anvil/sleeve removal tool (part #
25-09
k
) (BP of Figure 51) with cavity facing up and
place pulley (BN) onto tool.
Figure 51
BP
BN
2
.
Install bearing insertion tool (part # 25-10
k
) (BQ of
Figure 52) into arbor press or similar device.
BQ
Figure 52
3
.
Place and hold bearing (part # 21-33) (BO) onto tool
(BQ).
Figure 53
BO
k
- Part of Tool Kit, part # 2500M.
Preventive Maintenance and Adjustment
