12-2020
dormakaba Canada Inc. RAC5 MFC Installation Guide – PK3738 | 8
3.1.5 Power Adapter
NOTE:
Dependent on the countries’ electrical power requirements.
(J)
1x International 24 VDC output Adapter with integrated 6-foot (1.8m) power cable and interchangeable
AC outlet prongs. Input power requirements of 100-240 VAC, 50 – 60 Hz, 1.0A
Or
(K)
1x North America 24 VAC output power adapter with 2 separate 10-foot (3m) power cable assembly (2x 18
AWG cables terminated on one end with fork terminals). Input power requirements of 110-120 VAC, 60
Hz.
3.1.6 Installation Hard Bag
(L)
4x Philips wood screw, #8 x 1-1/4”
(M)
4x Nylon anchor, #6-10
(N)
4x Concrete anchor, #7-9
(O)
2x Strain relief connector with locking nut
(P)
Ring terminal connector
(Q)
5x Steel flat washer, #8
(R)
2x Crimp fork terminals, 18-22 AWG
3.1.7 Tools Required (not supplied)
Additional tools may be required dependent on the peripherals being installed. The list below covers the
installation of the RAC5 MFC enclosure only.
•
Safety glasses
•
Ink marker
•
Electric drill
•
9/64” (3.5 mm) drill bit
•
7/32” (5.5 mm) drill bit
•
1/4” (6.5 mm) drill bit
•
3/8” (9.5 mm) drill bit
•
Philips screwdriver - #2
•
Slotted screwdriver – 3/32” tip width
•
Adjustable wrenches
•
Crimp tool – 18-22 AWG
•
Pliers
•
Wire cutter/stripper
•
Hammer or rubber mallet
•
Awl or centre punch
