12-2020
dormakaba Canada Inc. RAC5 MFC Installation Guide – PK3738 | 4
1.1 Safety Procedures
Installation is to be done following standard safety procedures and using adequate equipment and protection
as prescribed. Power is to be off during the installation process as well as for any maintenance procedures.
Wear safety glasses when using any tools.
NOTE:
This equipment has been tested and found to comply with Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This
equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Adhere to UL STD 294
Adhere to the National Electrical Code ANSI/NFPA 70
Statement according to FCC part 15
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)
This device may not cause harmful interference, and
(2)
This device must accept any interference received, including interference that may cause undesired operation.
CAUTION
