2. Connect the
Connectorized LED (CLED)
to the driver. Align the M8 connector pins in the female receptacle on
the Doric CLED driver, slide in and screw the nut in place.
3. Connect the
5 VDC Micro-USB Power Supply
to the
5 V Input
of the
CLED Fan
for proper cooling of the LED.
4. For optimal performances, place the module in a well ventilated area. Overheating will affect LED power and
reduce its lifetime.
•
DO NOT connect/disconnect the optical fiber while the light source is ON.
• The CLED can be operated with the driver’s stand-alone capabilities (Section
) or using the
Doric Neuro-
science Studio
software (Section
3.2 FC Connector Installation
1. Clean the optical fiber connector before insertion. Use isopropanol and a lint-free wipe.
2. With an FC connector, the connector key must be oriented to enter within the receptacle slot to ensure proper
connection (Fig.
Figure 3.2:
FC connector, Fiber Installation
To reduce the risk of eye injury,
it is sound practice to NOT CONNECT/DISCONNECT OPTICAL
FIBERS when the light source is turned on
.
Chapter 3. Operations Guide
9
