–
The
Interlock Plug
comes with a small wire short-circuiting it. This wire must be removed before integrating
it into an
Interlock Circuit
.
–
Connect the
Interlock circuit
in series with the
Interlock Plug
so the circuit may function properly.
• The
Current Driver
sends current to any connected light source. If the
Key
is absent or the
Interlock Plug
has an
open circuit, it cannot receive signals from the micro-controller, preventing it from sending out current.
6.2 Emission Indicator
For light sources emitting invisible laser radiation, a dedicated LED indicator is ON when the driver is outputting an
electrical current. When the driver is outputting current, the light source will emit light from the aperture.
Chapter 6. Annex 1: Safety features
26
