3.4 Connected to Doric Neuroscience Studio Software
Figure 3.6:
1-channel LED Driver USB connected to Doric Neuroscience Studio Software
1. Connect the LED Driver to the power outlet with the included 12 V AC-DC adapter and turn the LED Driver switch
ON.
Always power the LED Driver before connecting the USB cable to the computer for a proper driver in-
stallation.
2. Install the Doric Neuroscience Studio Software on the computer. Double-click on the setup DoricStudioX.X.exe
file located on Doric USB memory stick supplied with the LED driver and follow the on-screen instructions.
3. Connect the
USB cable
to the driver and the computer.
4. Connect the
Connectorized LED
to the LED driver using the M8 electric cable. The light source will be recognized
by the software and will indicate the wavelength and the maximum current.
5. Connect the
5 VDC USB Mini-B Power Supply
to the
5 V input
for proper cooling of the LED.
6. With the system connected, the software can be used to control the device in
External TTL, External Analog,
Internal TTL and Internal Complex
modes. See section
for more details on using the software.
Chapter 3. Operations Guide
12
