8. The
Reset Zoom
button resets the axes in the
Graph
to their standard values.
9. The
Interlock
indicator displays
when the interlock is correctly connected, and
when discon-
nected.
10. The
Ce:YAG Temp
indicator displays the temperature of the
Ce:YAG source
in real time. This indicator will only
appear when a
Ce:YAG driver
is connected to the computer. Should the temperature be too high the temperature
will appear in
red
. Should the temperature be too low, the temperature will appear in
blue
.
4.1.3 Experiment View
The
Experiment View
box is used to display information related to the usage of each channel. This section allows limited
control of the light source while it is active.
Figure 4.13:
Experiment View, Light Source Channel
1. The
Light Source Channel
box (Fig.
) contains all elements related to a single light source channel.
2. The
Scope Channel
box (Fig.
) is used to control and configure an active
Scope
.
Figure 4.14:
Experiment View, Scope Channel
3. The
Controls View
displays all elements to control/configure the channel.
a) The
Start/Stop
button activates/deactivates the light source connected to the
Light Source Channel
.
b) The
Edit
button opens the
Channel configuration
window to edit the pulse sequence. This button is only
accessible when the channel is deactivated.
c) The
Current Box
box allows the current to be changed exactly (in mA).
d) The
Current Slider
allows the light source current to be adjusted.
e) The
Status
box displays the status of the channel (
Light source
or
Scope
). The
Status
will display
RUN-
NING...
when active and
STOPPED
when deactivated.
Chapter 4. Doric Neuroscience Studio
20
