V_1.OM.000160.DRM
Page 73
Version 5.0
Doremi Labs, Inc.
13.2.4 Merging the Left-Eye and the Right-Eye
•
Locate to the desired in-point of the Left-Eye recording and mark an IN point by pressing
the IN button.
•
Locate to the desired Out-point of the Left-Eye recording and mark an Out-point by
pressing the Out button.
•
Go to OPTION MENU (08) - Disk Copy
•
Select Merge? And press Enter.
•
The recording file name will be displayed.
•
Press the ++ key the IN point will be displayed.
•
Press the ++ key again the Out point will be displayed.
•
Go out of the menu.
•
Locate to a sync point on the Left-Eye recording (The Sync-point S1 should be within the
marked IN and OUT points)
•
Go back to the Menu.
•
Press the ++ key the Sync-point S1 will be displayed.
•
Press Enter to accept the S1 Sync-point.
•
Go out of the menu.
•
Locate to a sync point on the Right-Eye recording (The Sync-point S2 should be within
the recorded Right-Eye video)
•
Go back to the Menu.
•
Press the ++ key the Sync-point S2 will be displayed.
•
Press Enter to accept the S2 Sync-point.
•
Press the ++ key “Aud from L CH” will be displayed (“Aud from L CH” in this case is a
reference to the audio from the Left-Eye)
•
Press Enter to accept.
The next step is to create the 3D file. The 3D file should have the exact parameters as the
recording file except the Single Video parameter should be 3D, and the Bit rate should be
220Mb/s (a bit rate that is double or more of the recording file)
13.2.5 Creating the 3D File
Go to OPTION MENU (03) - New Record Set
•
Select the format. (Same as the recording file)
•
Select 220Mb/s
(the 3D file bit-rate should be double or higher than the bit-rate of the
recording file)
•
Select 3D Video
•
Select 4-2-2 (Same as the recording file)
•
Select the number of Audio Tracks (Same as the recording file)
•
Select Drop or Non Drop Frame (Same as the recording file)
•
Select V1 Encoding (Same as the recording file)
•
Select 16 bit Audio (Same as the recording file)
•
Select Standard VANC (Same as the recording file)
