V_1.OM.000160.DRM
Page 32
Version 5.0
Doremi Labs, Inc.
6.4.3 Creating a Segment
To work with segments, first ensure that OPTION MENU (1)
Transport
Emulate
is set to
V1
.
To create a segment, press
IN
button where you want the in point to be and press
OUT
where
you want the out point to be. You may mark IN and OUT on-the-fly while you are playing or you
can locate to each point individually (Enter Time Code and push
GOTO
or locate command on
an external controller) and enter the in and out points separately.
Press
SAVE
and enter a number from
0001 to 2000
to identify the segment and then press
ENTER
. To recall any defined segment for playback, press
RECALL
, enter the number of the
segment from
0001 to 2000
, and then press
ENTER
. The segment will play automatically and
the LCD will display the segment information as indicated in the following section.
NOTES :
The V1 will not save any segment number above 2000 and will not save segment number
0000.
When you enter a segment number, the V1 will locate to the start of the segment after a
certain delay. If you do not want the V1 to locate to those intermediate segment numbers,
you should enter the whole number quickly.
If you want to define the segment that will play directly after the one you have just entered,
before you hit
ENTER
press the up arrow key and enter the next segment (you can also define
the previous segment) then press
ENTER
.
6.4.4 Creating a Play List and Loops
Once the segments are fully defined as described above, a play list can be defined to
automatically chain or loop segments during playback. In order to implement this list, each
segment requires the definition of a "next segment" parameter and, optionally, a "previous
segment" parameter.
To define the next segment:
♦
Press
RECALL
, enter the number of the segment to modify, press
++
, the LCD will display
"
Next Seg:
", enter the segment number of the segment you want to play next and press
ENTER.
Note that you are only allowed to enter valid segment numbers.
♦
Do the above for each segment you want to chain.
♦
To create a “play list” that loops simply have the last segment of the chain point to the first
segment of the chain
♦
If you want to create a loop of a single segment, recall a segment and set the “next segment”
to the same number as the segment you just recalled.
Define a previous segment only when you want to insert a segment into an existing play list:
♦
Press
RECALL
and enter the number of the segment to be inserted, press
--
, the LCD will
display "
Prev Seg:
", enter the segment number that will precede it in the play list and press
ENTER.
♦
Press
RECALL
and enter the number of the segment to be inserted, press
++
, the LCD will
display "
Next Seg:
", enter the segment number that will follow in the play list and press
ENTER.
NOTE:
You are only allowed to enter valid segments.
