V_1.OM.000160.DRM
Page 22
Version 5.0
Doremi Labs, Inc.
5.2 Front Panel
The V1 front panel (called the RCV2) contains space for up to 3 Low Profile SCSI drives,
keypad, menu controls, transport controls, LCD display and an optional LCD video confidence
monitor.
To
disable
the front panel and prevent accidental operation, hold the
OPTION
button then press
ESCAPE
. Press again to unlock the RCV2. When the RCV2 is in “disable mode” the letters
“DIS” will be displayed in the top right corner of the LCD.
To
reset
the controller (soft reset) hold the 1, 2, 3 or 4 buttons and press
CLEAR
. This may be
necessary to reset the LCD video monitor if you switch between NTSC & PAL formats.
5.2.1 Keypad Area
Figure 17: Keypad Area
1
,
2
,
3
,
4
(Channel Selection): If your V1 is in 1R/P mode, only channel "1" can be
selected. If it is in 1R-1P mode channels “1” and “2” can be
selected.
AUD. SEL
:
Audio Select button: Switches between audio channel
pairs for the headphone connection.
ALPHA-NUMERIC KEYPAD
: This keypad is used to enter numeric data such as time
code addresses, in and out points, locate points, etc. To
enter data, simply begin typing the numbers and the
display will automatically overwrite. To abort an operation,
press the
ESCAPE
button. The display will revert to its
previous setting. The
BKSP
(Backspace) button can be
used to correct typing errors. The keypad can also be used
to name Video Segments by using the corresponding
letters (This Feature is not yet available).
RECALL
:
Recall a saved video segment. For more about segments
See paragraph
6.4
.
SAVE
:
Save a video segment into a memory location number or
name.
CLEAR
:
Clears the display to enter new data.
ENTER
:
Press after selecting a segment to play. Also to answer
YES to the V1’s “are you sure?” question.
