V_1.OM.000160.DRM
Page 7
Version 5.0
Doremi Labs, Inc.
PROTECTING YOURSELF AND THE V1
Never touch the AC plug with wet hands
Always disconnect the V1 from the power supply by pulling on the plug, not the cord.
Allow only a Doremi Labs, Inc. dealer or qualified professional engineer to repair or reassemble
the V1. Apart from voiding the warranty, unqualified engineers might touch live internal parts
and receive a serious electric shock
Do not put, or allow anyone to put any object, especially metal objects into the V1
Use only an AC power supply. Never use a DC power supply.
If water or any other liquid is spilled into or onto the V1, disconnect the power, and call your
dealer.
Make sure the unit is well ventilated, and away from direct sunlight.
To avoid damage to internal circuitry, as well as the external finish, keep the V1 away from
sources of direct heat (stoves, radiators, etc.).
Avoid using aerosol insecticides, etc. near the V1. They may damage the surface, and may
ignite.
Do not use denatured alcohol, thinner or similar chemicals to clean the V1. They will damage
the finish.
Modification of this equipment is dangerous, and can result in the functions of the V1 being
impaired. Never attempt to modify the equipment in any way.
In order to ensure optimum performance of your V1, select the setup location carefully, and
make sure the equipment is used properly. Avoid setting up the V1 in the following locations:
1. In a humid or dusty environment
2. In a room with poor ventilation
3. On a surface that is not horizontal
4. Inside a vehicle such as a car, where it will be subject to vibration
5. In an extremely hot or cold environment
