V_1.OM.000160.DRM
Page 66
Version 5.0
Doremi Labs, Inc.
•
Select Standard VANC (Same as the recording file)
•
Select 10b Precision (Same as the recording file)
To create the 3D file:
•
Hold the OPTION Key and press SAVE
•
Press Enter to create the file.
12.2.6 Executing the Merge
After the 3D/Video & Key file is created.
•
Locate to the desired time-code location (By default the paste will be at 00:00:00:00).
•
Go to OPTION MENU (08)
•
Select Paste
•
Press Enter
•
The Merge process will start and the resulting Video & Key video will be pasted at the
chosen time code location.
Note: make sure that you have enough disk space to accommodate the recordings and the
generated Video & Key file (Ex: if your Video and Key parts recordings are 1 hour long you will
need to have a free space on the drive sufficient for 30 minutes of recording at 220Mb/s.
After the merged Video & Key file is verified and plays properly in sync; you can delete the
Single-video recording file.
To delete the single-video recording file:
•
Hold the OPTION Key and press CLEAR.
•
Use the JOG wheel to browse the file list.
•
Press Enter to delete the file.
Example:
•
The Video-part recording starts at 00:00:00:00 and ends at 00:10:20:25
•
The Key-part recording starts at 01:00:00:00 and ends at 01:12:01:07
•
The start of the needed Video-part starts at 00:01:02:03 and ends at 00:10:02:03 (total
duration is 9 minutes)
•
A sync point on the Video part is located at 00:05:02:03
•
A sync point on the Key-part is located at 01:06:02:03
In this example the Merge function will use:
•
The Video-part from 00:01:02:03 to 00:10:02:03.
•
The Key-part from 01:02:02:03 to 01:11:02:03
•
The duration of the Video & Key will be 9 minutes.
