background image

25

MY SENSOR WAS BLOWN OFF, (BLOWOUT) WITH NO ALERT GIVEN, WHY? 

Instant tire failure is rare in comparison to the more common failure caused by gradual tire 
deflation.  It is possible, during an instantaneous blowout, to have the sensor blown off the tire 
before it has had a chance to send a signal to the monitor.  The 360RV is not designed for this 
type of tire failure.  Tire failure referred to as a blowout, is commonly due to low tire pressure 
resulting in an overheating of the tire sidewalls to the point of disintegration. The DORAN 360RV 
is designed solely to monitor tire pressure.   It is not designed to provide warning of a potential or 
actual tire blowout.

2. TIPS

TIRE CONDITION:         

Conduct a regular visual inspection of the vehicles tires.  

The sensors 

are not a substitute for proper tire maintenance and it is the user's responsibility to 
maintain proper amounts of tire pressure and respond accordingly to warnings and alerts. 

 

Low tire pressure is not the only problem associated with tires.  Therefore, symptoms such as 
bulges, uneven tread, abnormal noise, etc. should 

immediately

 be brought to the attention of a 

professional.  

ROTATING/REPLACING TIRES:  

When rotating or replacing tires, mark wheel location of each 

sensor.  Remove sensors and store in bags or in an egg carton until work is done, and then return 
the sensors to their original wheel location.  You can also delete the sensor positions on the 
Monitor (page 12), and reinstall the sensors per the instructions on page 5.

RF (Radio Frequency) PRODUCTS: 

The 

Doran 360RV

 utilizes RF technology to transmit a 

signal between the sensor and the monitor.  RF signals are subject to interference from many 
types of signals and products, which can cause errors in the operation of the product.  As with cell 
phones and other types of electronics using RF signals, signal interruption can occur and cause a 
lost signal transmission.

COOL TEMPERATURES AND HIGH ALTITUDE:

  These conditions may cause tires to lose 

pressure.  If a tire is close to its low-pressure level, an alert can be sounded when pressure drops 
overnight due to cooler temperatures.  Inflate to proper level in the morning. 

REMOTE ANTENNA or INTERIOR / EXTERIOR BOOSTER FOR UNIQUE APPLICATIONS: 

Due to the unique features of RF signals and the construction and interference from electronics 
on some RVs and Trucks, a coaxial antenna or RF Booster may be necessary. If needed, contact 
Doran Mfg., LLC at: 1-866-816-7233.

VI. FAQS AND TIPS

Содержание 360RV































Отзывы: