Doosan NHP10-425WCU-EU-FX-T3, Руководство по эксплуатации и обслуживанию

Страница: 42 / 88

Operating & Maintenance Manual Operating Instructions
38
8. Stg 2 Disch Temp: Displays the airend stage 2 discharge temperature
measured in the stage 2 discharge venturi.
9. Remote Press: Displays the pressure from an external tap measured
downstream of the package discharge. If REMOTE PRESS is selected
from user menu.
10. Comp Filter In Press: Displays the pressure at the compressor oil filter
inlet.
11. Comp Filter Out Press: Displays the pressure at the compressor oil filter
outlet.
12. Comp Oil Inject Temp: Displays the airend injected oil temperature.
13. Eng Speed: (rpm) Displays the rotational speed of the engine flywheel.
14. Eng Coolant Temp: Displays the engine coolant temperature entering the
radiator.
15. Battery Voltage: (volts) Displays the onboard battery voltage.
16. Software Version
B. Engine Status - Displays the following engine sensor values:
1. Engine Oil Pressure: Displays engine oil pressure.
2. Engine Oil Temp: Displays engine oil temperature.
3. Boost Pressure: Displays air pressure at engine intake manifold.
4. Intake Manifold Temp: Displays engine intake manifold temperature.
5. Engine Coolant Temp: Displays engine coolant temperature.
6. Percent Load: Displays approximate engine load as a percent of full
engine rated H.P.
7. Percent Throttle: Displays approximate engine throttle position as a
percent of full throttle position.
8. Barometric Pressure: Displays barometric pressure.
9. Engine Speed : (RPM) Displays the rotational speed of the engine.
10. Fault 1 - Fault 5: Displays last 5 engine shutdowns.