Doosan NHP10-425WCU-EU-FX-T3, Руководство по эксплуатации и обслуживанию

Страница: 27 / 88

Operating Instructions Operating & Maintenance Manual
23
8. Unload Button: Press this button to “unload” machine prior to stopping.
NOTE: Pressing this button will close air intake and decrease engine
speed to idle condition.
9. Stop Button: Press this button to initiate a controlled stop to the machine
following “unload”.
10. Power On-Off Switch: Use this switch to turn power “ON” or “OFF” to
controller. Switch must be in ON position for machine to operate.
NOTE: Always use Stop button (item 9) to stop machine before switching
to “OFF.”
11. Lights Switch: Operates Lamp.
12. Ether Inject Button: Injects a measured shot of ether for aid in cold weather
starting of engine.
CAUTION
!
Use sparingly.
13. Hourmeter: Indicates running time for maintenance purposes.
14. Emergency Stop Button: Press this button to immediately stop machine. Use
this button ONLY during emergency conditions. The Stop button (item 9)
should be used for normal stops.
Another emergency stop is located on drawbar end of machine.
15. Warning Lights (flashing): Located on each end of machine. Indicates alert,
shutdown condition, or starting.
WARNING
!
Do not climb on top of unit.