Doosan NHP10-425WCU-EU-FX-T3, Руководство по эксплуатации и обслуживанию

Страница: 39 / 88

Operating Instructions Operating & Maintenance Manual
35
Stopping
Press the STOP button. The unit will unload and begin timed cool down (180 seconds). Once
the timed cool down is complete, the engine will shutdown.
During a normal “non-emergency” stop, the following stopping procedure should be followed:
1. Press STOP button. The compressor will unload and engine speed will go to
idle.
2. A three minute cool down will begin.
3. When the cool down is complete, the engine will stop.
4. Switch the POWER switch to “OFF”.
5. Turn battery disconnect switch to the “OFF” position.
NOTICE
Once the engine stops, the automatic blowdown valve will continue to
relieve all pressure from the check valve to discharge valve piping.
WARNING
!
Even after pressure is relieved from the piping system, any air supply line
from the compressor to a tool or machine could remain under pressure
and cause serious personal injury or death. After the compressor stops,
carefully open a valve at any tool or machine to exhaust the pressure in
any line prior to removal or servicing.