Doosan DL220 Скачать руководство пользователя страница 149

Страница: 149 / 250

OP001015

4-5

Inspection, Maintenance and Adjustment

Service Position

BEFORE beginning service work the machine must be parked
on level ground and positioned as shown below.

AFTER completing the service, all guards must be installed and
all engine covers must be closed and locked.

FG015607

Figure 3

Reference

Number

Description

The bucket/attachment must be resting on the ground.

Apply the parking brake.

Shut down engine and take out the ignition key. (Does not apply when checking oil level in
transmission).

Carefully release the pressure in pressure lines and pressure vessels to avoid risks.

Attach a black and yellow "Warning Tag" to the steering wheel.

Connect the frame joint lock.

Block the wheels in a suitable way (with, for example, wedges).

Allow the machine to cool.

Содержание DL220



























































































































































































































































Результаты поиска

Содержание DL220

Отзывы:

Doosan DL220, Руководство по эксплуатации и обслуживанию, Страница: 149 / 250

Результаты поиска

Содержание DL220

Отзывы: