Doosan DL160, Руководство по эксплуатации и обслуживанию

Страница: 43 / 236

OP000753
1-31
Safety
Take Time to Provide Good Visibility
Be careful not to go close to the edge of a cliff by mistake.
Use the machine only for its main purpose. Using it for other
purposes will cause failures.
To ensure an ample view, do as follows:
• When working in dark areas, attach working lights
and front lights to the machine. If necessary, set up
lighting at the work site.
• Stop operations when the visibility is poor, such as in
fog, mist, snow, and rain. Wait for the visibility to
improve to a level which causes no problems for the
operation.
• Keep dirt and dust off of windows and off lens
surfaces of work lights. Stop working if lights,
windows or mirrors need cleaning or adjustment.
To avoid hitting the work equipment, always do the following:
• When working in tunnels, on bridges, under electric
wires, or when parking the machine or carrying out
other operations in places with limited height, be
extremely careful not to hit the bucket or other parts.
• To prevent collisions, operate the machine at a safe
speed when working in confined spaces, indoors, or
in crowded areas.
• Do not pass the bucket over the heads of workers or
over the operator's compartment of dump truck.
Keep "Pinch Point" Areas Clear - Use
Caution in Reverse
Use a signal person in high traffic areas and whenever
operator's view is not clear, such as when traveling in reverse.
Anyone standing near wheels, or working assemblies of the
attachment, is at risk of being caught between moving parts of
machine.
Never allow anyone to ride on any part of machine or
attachment, including any part of operator's cabin.
Figure 21
HAOA191L