Vehicle System
Disassembly & Assembly
10
(Typical Example)
10.
Install cross head (12) and retaining ring(11).
(Typical Example)
11.
Put the chains in position over cross head
(12).Install nuts(9) onto the chain anchors to a
torque of
270 ± 40 N
•
m (200 ± 30 lb
•
ft).
Install bolts (10) onto the hose mounting bracket.
(Typical Example)
12.
Install chain guard/hose support assembly (6)
and four bolts(8) to a torque of
8 ± 2 N
•
m (6 ±
1.5lb
•
ft)
(Typical Example)
13.
Connect two hydraulic line (4) in their original
positions.
End By:
a.
Install backrest.
b.
Install forks.
Disassemble Carriage
Start By:
a.
Remove carriage.
(Typical Example)
1.
Remove the roll pins and pins (2) to disconnect
chains (1).
