DoorKing 9000-080 Скачать руководство пользователя

Страница: 41 / 44

9000-065-J-9-11

7.4 Accessory Items

The following accessory items are available for the model 9000 slide gate operator.

Contact Sensors

- For use as a secondary entrapment protection device. Miller Edge, Inc., MGO20, MGR20, MGS20

Photo Cell

- Non-contact (photocell) sensors for use as a secondary entrapment protection device.

MMTC, Inc. Model IR55 - P/N 8080-010 MMTC, Inc. Model 60-278 - P/N 8080-011
Carlo Gavazzi Type PMP12 - P/N 8080-030 Carlo Gavazzi Type PMT - P/N 8080-031

Loop Detector

- Detectors plug directly into ports on circuit board simplifying wiring.

Single channel detector - P/N 9410-010 Dual channel detector - P/N 9409-010

Loop Wire

- 18 AWG loop wire with XLPE insulation is ideal for ground loops. Available in 500 and 1000 foot rolls. Red, blue or

black insulation.

Pre-Fab Loops

- Prefabricated ground loops. 24-foot circumference with 50-foot lead-in. Available in yellow, red or blue jackets.

Not for use in asphalt roadways.

Loop Test Meter

- Meg-ohm meter checks the integrity of ground loops. P/N 9401-045

Remote Alarm/Reset Station

- Provides a remote station to reset an operator in a hard shutdown condition. Must be mounted

in line-of-site of the gate and operator. Includes visual alarm light and audible siren. P/N 1404-080.

Interconnection Cable

- Interconnect wire cable contains all the necessary wires to interconnect primary / secondary operators.

Cable length: 30 ft. - P/N 2600-755 40 ft. - P/N 2600-756 50 ft. - P/N 2600-757

Time Clock

- 7 day and 365 day time clocks can be used to automatically open gate at pre-set time and days. Compact clock fits

inside the operator. 7 day clock - P/N 2600-791 365 day clock - P/N 2600-795

Heater with Fan Assembly Kit

- Thermostatically controlled heater and fan for cold and hot environments. P/N 1601-154

V-Wheels

- 4 inch and 6 inch. UHMW or Steel. Roller bearings or sleeve bearings. Single or tandem wheel configurations.

Endless Idler Assembly with Protective Cover

- Use when gate operator chain needs 180° return. P/N 2600-818

Guide Rollers with Protective Covers

- A variety of sizes to support slide gates.

Gate End Retainer

- Fits on top of end post and helps stabilize the end of the gate in the open or closed position (End post NOT

provided). P/N 1204-004

Post Mount Kit for 9000

- Required for post mount installation. P/N 9000-015.

Chain Tray Kit

- 10 Ft. section. Sections connect together to fit any length gate. P/N 2601-270

Additional #40 Chain

- 20 ft. per box. P/N 2600-442

Surge Devices

- High and low voltage surge suppressors help prevent circuit board failure caused by lightning strikes and

power surges. High Voltage - P/N 1876-010 Low Voltage - P/N 1878-010

Gate Scale

- Use to test torque required to move gate. P/N 2600-225

Speed Bumps

- Prefabricated six-foot speed bump reduces traffic speed through gate system. P/N 1610-150

1000 Inverter/Back-Up Power System

- Power back-up and continuous operation when 115 VAC primary (AC) power has

failed.

1000 Watt Model

(P/N 1000-080) can be used to power a single 1/2 HP gate operator system when operating continu-

ously or used with two (2) 1/2 HP gate operator system when opening ONLY ONCE upon a power failure. The “Two battery
option” extends the number of times the system can cycle with battery power but does not increase the HP or number of
operators that can be used.

1500 Watt Model

(P/N 1000-081) can be used to power two (2) 1/2 HP gate operator system or a

single 1 HP gate operator system when operating continuously.

Not available

for the 208/230 or 460 model 9000 operators.

Mounting post kit for 1000 inverter cabinet

(P/N 1000-045)

Conc

rete

Power Input

Low

ltage