dooch XQ-0075T-2, Руководство по установке, Страница: 28 / 80

Chapter 5. Operation
Parameter Code Function Description
Signal 2
Signal 3 To set up CAN Comm. Speed
To set up CAN Comm. ID
(If ID is ‘0’, CAN Comm. is disabled.)
Setup Item
CAN Comm. ID
CAN Comm. Speed
Function Description
To set up gain to adjust response characteristics of PID
controller
To set up Control Cycle of PID Controller
Minimum pressure variance to allow drive to Start/Stop
To operate pump alternatively in force during multi-drive
operation
Parameter Code
Pump 21~23
Pump 24
Pump 32
Pump 35~36
Pump 31
To set up initial starting output frequency of PID controller
in order to speed up response against initial starting
Setup Item
PID Controller Gain Setup
Control Cycle of
PID Controller
Start/Stop Pressure
Variation
Lead Pump Alternation
Initial Output Ratio
on Starting
3) Drive Control Function upon External Command
These parameters are to be set when controlling the drive using an external controller.
4) CAN Communication Function Setup
These parameters are to be set basically for CAN communication used on interoperation or connecting
LCD Monitor.
1) Pump Control Parameters
5.2.2 Expansion Function Setup
Setting up the parameters to operate pump system optimally except for those to be set for operating the
drive. Any parameter that is not set by the user, is set with the factory value by default.
28
Function Description
To set up frequency input mode
during manual operation.
To select external Analog input (I, V)
To set up the frequency range against voltage
when controlling drive using V1 voltage.
To set up theoutput frequency range against
current when controlling drive using I1 current.
To set up the frequency range against voltage
when controlling drive using V2 voltage.
Parameter Code
Drive 2
Signal 1
Signal 2,4,5,7
Signal 3,4,6,7
Signal 12,14,15,17
Signal 13,14,16,17
To set up the frequency range against current
when controlling drive using I2 current.
Setup Item
Frequency Setup
To set up frequency input mode during
manual operation.
Signal 8
(for AI1 input setup)
Signal 18
(AI2 input setup)
Properties
Frequency Setup
upon V1 Voltage
Frequency Setup
upon V2 Voltage
Frequency Setup
upon I1 Current
Frequency Setup
upon I2 Current
External Analog input