DONATI SOLLEVAMENTI S.r.l. - Via Quasimodo,17 - 20025 Legnano (MI) - Tel. 0331 14811 - E: [email protected]
15
3.4 Warnings inherent to residual risks
•
After having carefully considered the dangers present in all operating phases for
“DGT” drive
and/or
endcarriages
, the following measures have been adopted so as to eliminate, as far as possible, risks for
operators and/or limit or reduce risks deriving from dangers which cannot totally be eliminated at their source.
However, in spite of all the precautions adopted on the machine, the following
residual risks
remain; these
risks can be eliminated or reduced through the following preventive measures:
RISKS DURING OPERATION
DANGER / RISK
CAUTION / WARNING
OBLIGATION / PREVENTION
Risks from the danger of becoming
ensnared and/or crushed
, following
contact with the
beams and/or
wheels
in motion, where such
components
are
accessible
to
operators.
•
Warning!
Exposure to moving
parts can create dangerous
situations.
•
Caution!
Do not touch moving
Beams and/or Wheels
.
•
Ascertain
that the rail/wheel
contact area is
> 2.7
m
above the
walking area.
•
For quotas <
2.7 m
, enact
special
technical
measures
.
RISKS DURING MAINTENANCE
DANGER / RISK
CAUTION / WARNING
OBLIGATION / PREVENTION
Risk
of
electrocution
when
performing maintenance on electrical
motors without cutting off electrical
power first.
•
Caution!
Do not intervene on
electrical motors without cutting
off electrical power first.
•
Caution!
Do not restart the
motors without replacing the
covers on the terminals.
•
Entrust electrical maintenance
operations to qualified personnel
only.
•
Perform controls on electrical
equipment as required by norms.
•
After controls, replace the covers
on the terminals.
Risks from the danger of becoming
ensnared, crushed and/or exposed
to falling loads
during inspections,
adjustments and maintenance on
Beams and/or Wheels.
•
Warning! Exposure to moving
parts can create dangerous
situations
.
•
Caution!
Do not intervene on
moving parts
•
Caution!
Access
to
non-
authorized
personnel
is
forbidden.
•
Entrust maintenance operations
to qualified personnel only.
•
Make use of suitable personal
safety devices and equipment
when carrying out adjustments on
parts and components.
