1.
SAFETY INFORMATION
•
Read this manual before using or installing the dryer.
•
Keep this manual in a safe place for use in subsequent configurations,
•
This manual must be handed over with the machine if it is sold to somebody else.
•
ONLY
use the machine for professional drying of textile fibres after washing in water.
•
Do not leave petrol or other inflammable liquids or gases near to the dryer.
•
Do not dry products that have been treated or that give off inflammable vapours or elements.
•
Do not dry garments containing foam or latex, materials with a rubber texture or pillows filled with foam
rubber.
•
Always bear in mind the instructions described on the labels of the materials to be dried.
•
Do not leave the dryer operating unattended.
•
Do not insert hands in the dryer while the drum is still rotating. The dryer should not operate when the
door is open.
•
Do not touch the safety devices of the dryer.
•
Do not allow children to play in or on the machine. They must be kept away from the machine,
especially if it is operating.
•
Cleaning the fluff filter every 10 hours of operation, at least.
•
Do not allow fluff, dust or dirt to build up around the machine.
•
Do not sprinkle either the inside or the outside of the dryer with water.
•
Stopping the dryer before it finishes the cycle is not recommended due to the risk of spontaneous
combustion.
•
Removing the load as soon as the cycle has ended is recommended, as this reduces the risk of
spontaneous combustion.
•
The risk of burning yourself exists when you remove the load before the cycle has ended, if a high
drying temperature has been selected.
•
If the power supply is interrupted, it is advisable to open the dryer's door to prevent the spontaneous
combustion of the load.
•
Maintenance and installation can only be carried out by qualified personnel. Please contact your
distributor or Technical Service to resolve any incidents or queries not contained in this manual.
Caution: Label all wires prior to disconnection when servicing controls. Wiring errors can cause
improper operation
•
Do not repair or replace any components of the dryer unless recommended to do so in the
maintenance instructions.
ALWAYS
disconnect the dryer from the electricity supply before starting
any repair and/or maintenance work.
•
Close or disconnect all the power supplies of the machine at the end of each working day and before
removing any protective cover either for cleaning, maintenance or tests.
•
It is advisable to install flanges with flexible material to prevent air vibration from causing too much
noise in the facility.
•
The manufacturer reserves the right to make future modifications without prior warning.
8
