The machine operation does not require any type of maintenance. Bearing greasing is permanent for the
machine's entire useful life.
THE PERFORMANCE OF THE DRYER LARGELY DEPENDS ON GOOD MAINTENANCE AND
CLEANING OF ALL THESE ELEMENTS.
10.1. Fluff filter
The appliance includes an independent fluff filter for each dryer located at the front of the machine. These
are in the upper part for the upper dryer and in the lower part for the lower dryer.
They can be accessed directly by opening the corresponding drawer using the key supplied.
It is designed to separate fluff and possible solid materials that come off the dried material, so that they do
not enter the propeller of the extraction fan. The fluff accumulates in the filter.
The drawer can be locked. Once the lock has been unlocked, just pull out until the filter is visible. A metal
stop prevents the filter from being extracted completely.
The filter is made of stainless steel mesh for a longer life. The filter should be cleaned with a brush that is
not made with metal or hard bristles.
CAUTION
, protective gloves should be worn if cleaning the filter
directly by hand.
The filter should be cleaned after every 10 hours of operation.
For maximum efficiency it is recommended
to clean it more often.
10.2. Heating battery
The heating system may be electric or gas. The heating batteries are located in the top of the machine.
The fluff and dust collected in the electrical heating must be cleaned every two months to prevent risks.
At least once a year, thoroughly clean the battery using compressed air in the direction opposite to the air.
42
