3.6.
Injector replacement / Conversion kits
The conversion kit shall be installed by a qualified service agent. A qualified service agent is any individual,
form, wcorporation, or company that either in person or through a representative is engaged in and is
responsible for the connection, utilization, repair, or servicing of gas utilization equipment or accessories;
who is experienced in such work, familiar with all precautions required, and has complied with all of the
requirements of the Authority Having Jurisdiction.
Before proceeding with the change of the injector, MANDATORY the following steps
:
1.
Disconnect the machine from the electrical network
.
2.
Shut off the gas supply to the machine
.
If the appliance is installed in a country where it is necessary to change the injector diameter or even to
install the appliance ready for operation with another type of approved gas, please call the technical service
to make the change.
Please follow the instructions below to replace the injectors.
TOOLS REQUIRED
1. No 13 socket wrench
2. Manometer
3. Flat-head screwdriver
Propane gas injector (found in the BAG close to the valve).
WARNING:
This conversion kit shall be installed by a qualified service
agency in accordance with the manufacturer’s instructions
and all applicable codes and requirements of the Authority
Having Jurisdiction. If the information in these instructions
is not followed exactly, a fire, explosion or production of
carbon monoxide may result causing property damage,
personal injury or loss of life. The qualified service agency
is responsible for the proper installation of this kit. The
installation is not proper and complete until the operation
of the converted appliance is checked as specified in the
manufacturer’s instructions supplied with the kit.
19
