4.3.1. How to finish drying
•
OPL Mode:
Push START/STOP key (1)
•
Self-service Mode:
Push START/STOP key (1)
4.4.
ALARMS AND WARNINGS
The open door and open filter alarms lead to the pausing of the current programme. When the conditions
triggering the alarm disappear, the drying cycle can be restarted as soon as the alarm is removed. The
other alarms stop the programme and a warning alarm is heard. This warning is stopped by pressing
Start/Stop or by removing the reason for the alarm.
When any of these alarms is triggered: AL-3, AL-4 or AL-9, the machine enters an alarm mode which
permits a progressive reduction of the internal temperature of the dryer and the fabrics to prevent damage
to the materials and prevent burns. This cooling lasts 10 minutes. After this time the machine stops but the
alarm remains on until it is duly cancelled. The cooling can be cancelled by pressing Start/Stop.
Before starting the machine, an initial check of the alarms AL-1, AL-2, AL-3, AL-5 and AL-9 is made. If any
of these are on, the machine cannot be started.
The following table lists the different alarms and warnings and their possible solutions. They are indicated
via a code of red flashes on the Start/Stop LED light. To determine the alarm number, count the number
of short flashes of the LED. The cycle is repeated after a long flash.
28
